Verticutting
- Michael Wise
- Posts: 4554
- Joined: August 3rd, 2010, 10:36 pm
- Location: Hensley, AR
- Grass Type: Tifway 419
- Lawn Size: Not Specified
- Level: Not Specified
Verticutting
Was it effective at breaking up bermuda stolon matting?
Afraid this may be an issue for me one day.
[ Post made via iPhone ]
Afraid this may be an issue for me one day.
[ Post made via iPhone ]
- Mightyquinn
- Posts: 4354
- Joined: July 1st, 2009, 3:42 pm
- Location: Southeast NC
- Grass Type: Bermuda Tifway 419 Monostand
- Lawn Size: Not Specified
- Level: Not Specified
Re: Verticutting
I would say it was. I did it this spring when the grass started greening up, the only problem I had was how deep to go. One notch seemed to just get the high spots while the next one down seemed to go real deep. The other thing I like about it was that it seemed to level the lawn a little because of it knocking down the high spots. I think I am going to start doing it annually and/or core aerate also.
- Michael Wise
- Posts: 4554
- Joined: August 3rd, 2010, 10:36 pm
- Location: Hensley, AR
- Grass Type: Tifway 419
- Lawn Size: Not Specified
- Level: Not Specified
Re: Verticutting
I'll reassess next year, but I think this will become part of my regimen, as well.
Most of the lawn is so tight this season, that I wonder how effective my spring scalp will be next year. The stolon mat is weaved so tight that even mowing at 3/4" tall, you are still walking on top of the grass. You have to "drill" your fingers through the grass to touch soil.
By no means am I complaining. Just trying to figure out what to expect with the coming seasons.
Most of the lawn is so tight this season, that I wonder how effective my spring scalp will be next year. The stolon mat is weaved so tight that even mowing at 3/4" tall, you are still walking on top of the grass. You have to "drill" your fingers through the grass to touch soil.
By no means am I complaining. Just trying to figure out what to expect with the coming seasons.
- Michael Wise
- Posts: 4554
- Joined: August 3rd, 2010, 10:36 pm
- Location: Hensley, AR
- Grass Type: Tifway 419
- Lawn Size: Not Specified
- Level: Not Specified
Re: Verticutting
On the plus side, too, there is a verticutting head available for my mower.
- Mightyquinn
- Posts: 4354
- Joined: July 1st, 2009, 3:42 pm
- Location: Southeast NC
- Grass Type: Bermuda Tifway 419 Monostand
- Lawn Size: Not Specified
- Level: Not Specified
Re: Verticutting
Aren't you luckyMichael Wise wrote:On the plus side, too, there is a verticutting head available for my mower.
Yeah, mine was getting like that too, but since I verticut and sanded the lawn mine has been pretty good. I used to get wheel tracks in the grass from the weight of the mower pushing down on it and I don't really have that anymore.
-
- Posts: 183
- Joined: July 31st, 2012, 3:34 pm
- Location: Arlington, TN
- Grass Type: Palisades Zoysia
- Lawn Size: Not Specified
- Level: Not Specified
Re: Verticutting
You should verticut, topdress, and aerate at least once annually if you are really wanting to keep it nice. Aeration is the most beneficial. If you are really pushing the fertilizer and mowing low you are building thatch and over time it will degrade the turf. Once the thatch gets problematic its hard to ever get back on top of it, so regular verticutting and topdressing will keep it manageable. Verticutting lightly encourages new growth and will groom the turf and make it thicker and more appealing afterwards. If you do it once a year I suggest heavy when grass is actively growing to recover. The more you verticut, the less intensive you have to be with it. Max for your lawn should be 3 times a year. Always do these cultural practices when your grass is actively growing and can recover, if not you risk opening up your canopy for weed encroachment. Topdressing should be done once yearly. Once your smooth it should not take as much.
-
- Posts: 169
- Joined: April 10th, 2012, 1:43 am
- Location: Orange County, CA, Zone 10a
- Grass Type: Yukon Bermuda-backyard; Unk hybrid & La Prima XD-front yard
- Lawn Size: Not Specified
- Level: Not Specified
Re: Verticutting
ok.hambone79 wrote:You should verticut, topdress, and aerate at least once annually if you are really wanting to keep it nice. Aeration is the most beneficial. If you are really pushing the fertilizer and mowing low you are building thatch and over time it will degrade the turf. Once the thatch gets problematic its hard to ever get back on top of it, so regular verticutting and topdressing will keep it manageable. Verticutting lightly encourages new growth and will groom the turf and make it thicker and more appealing afterwards. If you do it once a year I suggest heavy when grass is actively growing to recover. The more you verticut, the less intensive you have to be with it. Max for your lawn should be 3 times a year. Always do these cultural practices when your grass is actively growing and can recover, if not you risk opening up your canopy for weed encroachment. Topdressing should be done once yearly. Once your smooth it should not take as much.
- Michael Wise
- Posts: 4554
- Joined: August 3rd, 2010, 10:36 pm
- Location: Hensley, AR
- Grass Type: Tifway 419
- Lawn Size: Not Specified
- Level: Not Specified
Re: Verticutting
Thanks, hambone!
I need to get by the dealership and price that verticutter head.
I need to get by the dealership and price that verticutter head.
- Michael Wise
- Posts: 4554
- Joined: August 3rd, 2010, 10:36 pm
- Location: Hensley, AR
- Grass Type: Tifway 419
- Lawn Size: Not Specified
- Level: Not Specified
Re: Verticutting
hambone, or anyone else ,when you say "heavy", are you talking depth-wise or cutting in multiple directions? Say east-west and north-south?
- Mightyquinn
- Posts: 4354
- Joined: July 1st, 2009, 3:42 pm
- Location: Southeast NC
- Grass Type: Bermuda Tifway 419 Monostand
- Lawn Size: Not Specified
- Level: Not Specified
Re: Verticutting
I did it this Spring and saw pretty good results and I could see how it would be beneficial to do it during the year also. I would have to adjust my Pre emergent control if I decided to go that way. I would like to know more about this and I would like to start aerating again, my grass just seemed healthier when I used to do it. It has been 3 or 4 years since I aerated.
-
- Posts: 183
- Joined: July 31st, 2012, 3:34 pm
- Location: Arlington, TN
- Grass Type: Palisades Zoysia
- Lawn Size: Not Specified
- Level: Not Specified
Re: Verticutting
When I say heavy I am referring to the depth of the cut. On the golf side of things sometimes we verticut weekly, but very lightly to severe the stolons and encourage more density. We also have groomers that run in front of the reels that look almost like a tiny verticutting reel. We usually set the groomers a couple thousandths lower than cutting height and sometimes run those daily to reduce grain and achieve a more uniform cut. Most of that shouldn't pertain to a home lawn though. When you go deep you are removing thatch build up, go lightly and your severing stolons and thinning for new growth. The amount of thatch your dealing with will determine if you need to go two directions or not. The material that comes out needs to be discarded unless you are verticutting to groom your grass.
- Mightyquinn
- Posts: 4354
- Joined: July 1st, 2009, 3:42 pm
- Location: Southeast NC
- Grass Type: Bermuda Tifway 419 Monostand
- Lawn Size: Not Specified
- Level: Not Specified
Re: Verticutting
I am seriously thinking of doing this next year!!! My lawn is sooooo thick right now it is affecting getting a quality cut. Don't get me wrong it still looks good but it just seems like it needs something else to take it over the top and I know the stolons are super thick underneath. It is starting to get that spongy feel again. I am also thinking of aerating also which should help the situation but I will have to adjust my PreM schedule.
- Michael Wise
- Posts: 4554
- Joined: August 3rd, 2010, 10:36 pm
- Location: Hensley, AR
- Grass Type: Tifway 419
- Lawn Size: Not Specified
- Level: Not Specified
Re: Verticutting
Mine, too.
I gave in and raised the cut height to get the mower away from the thick mass of grass.
I don't know how else you COULD keep Bermuda low all year without it.
It just gets too thick!
[ Post made via iPhone ]
I gave in and raised the cut height to get the mower away from the thick mass of grass.
I don't know how else you COULD keep Bermuda low all year without it.
It just gets too thick!
[ Post made via iPhone ]
- Michael Wise
- Posts: 4554
- Joined: August 3rd, 2010, 10:36 pm
- Location: Hensley, AR
- Grass Type: Tifway 419
- Lawn Size: Not Specified
- Level: Not Specified
Re: Verticutting
I wish FirstLSK from Lawnsmarts would find this place.
He verticut monthly for what I think are the same reasons we are wondering about.
[ Post made via iPhone ]
He verticut monthly for what I think are the same reasons we are wondering about.
[ Post made via iPhone ]
- Mightyquinn
- Posts: 4354
- Joined: July 1st, 2009, 3:42 pm
- Location: Southeast NC
- Grass Type: Bermuda Tifway 419 Monostand
- Lawn Size: Not Specified
- Level: Not Specified
Re: Verticutting
I remember FirstLSK. He use to groom his monthly and had good results. I would love to find a verticutter with a delta blade around here, I think I would buy it in a heart beat, just can't seem to justify buying a new one.
Who is online
Users browsing this forum: No registered users and 11 guests