Sprayer Wand
-
- Posts: 2692
- Joined: April 25th, 2014, 11:11 pm
- Location: Macomb County Michigan
- Grass Type: Front/Side - Emblem, Back - Panterra V
- Lawn Size: Not Specified
- Level: Not Specified
Re: Sprayer Wand
You could have saved $8 through Zoro but, I understand.
-
- Posts: 161
- Joined: May 10th, 2016, 2:27 pm
- Location: Fort Worth, TX
- Grass Type: Bermuda
- Lawn Size: Not Specified
- Level: Not Specified
Re: Sprayer Wand
Ugh...I was so over the situation that I forgot about the Zoro price. Oh well.
-
- Posts: 161
- Joined: May 10th, 2016, 2:27 pm
- Location: Fort Worth, TX
- Grass Type: Bermuda
- Lawn Size: Not Specified
- Level: Not Specified
Re: Sprayer Wand
Received chapin cf valve tonight (model 6-8501). It came with two adapters, and one of them converts the tip end to 11/16". Teejet fits nice and tight now on my chapin 62000 sprayer.
[ Post made via iPhone ]
[ Post made via iPhone ]
- ReD-BaRoN
- Posts: 475
- Joined: September 17th, 2012, 9:54 pm
- Location: Worcester County, MA
- Grass Type: Northern Mix
- Lawn Size: 20000-1 acre
- Level: Experienced
Re: Sprayer Wand
I tried the combo listed by DFW on a 2 gallon Round Up sprayer,
however, I can't get anything past the 15 psi control valve. Is it possible the Round Up sprayer doesn't generate more than 15 psi?
however, I can't get anything past the 15 psi control valve. Is it possible the Round Up sprayer doesn't generate more than 15 psi?
- ken-n-nancy
- Posts: 2571
- Joined: July 17th, 2014, 3:58 pm
- Location: Bedford, NH
- Grass Type: Front: KBG (Bewitched+Prosperity); Side: Bewitched KBG; Back: Fine Fescue Blend + Prosperity
- Lawn Size: 10000-20000
- Level: Experienced
Re: Sprayer Wand
I suppose that's possible, but I would think it's quite likely that it generates more than 15psi, as that really isn't that much pressure.
-
- Posts: 501
- Joined: June 29th, 2016, 9:54 am
- Location: Fishers, IN
- Grass Type: Mix (mostly KBG)
- Lawn Size: Not Specified
- Level: Not Specified
Re: Sprayer Wand
You should be able to get 15psi if it is pressurizing. Have you tried it without the CF valve. I think DFW updated the wand parts.
- ReD-BaRoN
- Posts: 475
- Joined: September 17th, 2012, 9:54 pm
- Location: Worcester County, MA
- Grass Type: Northern Mix
- Lawn Size: 20000-1 acre
- Level: Experienced
Re: Sprayer Wand
Yeah, taking out the the valve works.
- ReD-BaRoN
- Posts: 475
- Joined: September 17th, 2012, 9:54 pm
- Location: Worcester County, MA
- Grass Type: Northern Mix
- Lawn Size: 20000-1 acre
- Level: Experienced
Re: Sprayer Wand
DFW,
I've love to understand how the 8004VS Tee Jet nozzle works for you with a 15psi cf valve. I can only get a tiny stream with 15psi cf, and the Tee Jet chart doesn't show any psi numbers lower than 30 for this particular nozzle. w/o the CF valve I get a nice uniform spray. This combination just doesn't seem to work for me for some reason.
Interested in your advice.
Thanks.
I've love to understand how the 8004VS Tee Jet nozzle works for you with a 15psi cf valve. I can only get a tiny stream with 15psi cf, and the Tee Jet chart doesn't show any psi numbers lower than 30 for this particular nozzle. w/o the CF valve I get a nice uniform spray. This combination just doesn't seem to work for me for some reason.
Interested in your advice.
Thanks.
Who is online
Users browsing this forum: No registered users and 9 guests